product specification revision: ecr/ecn information: sheet no. ec no: urf2010-0421 a1 date: 2010 / 01 / 21 title: PS-89675-1330 qma 1 of 3 document number: created / revised by: checked by: approved by: ps - 89675 - 133 j. wiener/jdw s. shah j. wiener template filename: product_spec[size_a](v.1).doc 1.0 scope this product specification covers qma, 50 ohm conne ctors 2.0 product description 2.1 product name qma 3.0 applicable documents and specifications 4.0 ratings 4.1 voltage test: 1000 vrms at sea level working: 480 vrms at sea level 4.2 temperature rating: - 65c to + 125c 4.3 frequency rating 0 to 18 ghz 4.4 nominal impedance 50 ohms
product specification revision: ecr/ecn information: sheet no. ec no: urf2010-0421 a1 date: 2010 / 01 / 21 title: PS-89675-1330 qma 2 of 3 document number: created / revised by: checked by: approved by: ps - 89675 - 133 j. wiener/jdw s. shah j. wiener template filename: product_spec[size_a](v.1).doc 5.0 performance 5.1 electrical requirements item description test condition requirement 1 insulation resistance mil-prf-39012, paragraph 3.11 5000 megohms 2 dielectric withstanding voltage mil-prf-39012, paragraph 3.17 1000 vrms 3 rf high potential withstanding mil-prf-39012, paragraph 3.23 600 vrms @ 5 mhz to 7 .5 mhz 4 contact resistance mil-prf-39012, paragraph 3.16 center contact outer contact 3 milliohms 2.5 milliohms 5 voltage standing wave ratio mil-prf-39012, paragraph 3.14 1.05 max dc to 3ghz 1.12 max 3ghz to 6ghz 6 rf leakage mil-prf-39012, paragraph 3.26 -75 db max @ 6ghz 7 rf insertion loss mil-prf-39012, paragraph 3.27 0.05 ? f(ghz) db max 5.2 mechanical requirements item description test condition requirement 8 material mil-prf-39012, paragraph 3.3 see sales drawing 9 finish mil-prf-39012, paragraph 3.3.1 see sales drawing 10 design mil-prf-39012, paragraph 3.4 see sales drawing 11 recommended mating torque n/a 12 force to engage axial force 5.62 lbs (25 n) typ 13 force to disengage axial force 4.50 lbs (20 n) typ 14 retention force between mated pairs axial force 80 lbs (355.86 n) 15 coupling proof torque mil-prf-39012, paragraph 3.6 n/a
product specification revision: ecr/ecn information: sheet no. ec no: urf2010-0421 a1 date: 2010 / 01 / 21 title: PS-89675-1330 qma 3 of 3 document number: created / revised by: checked by: approved by: ps - 89675 - 133 j. wiener/jdw s. shah j. wiener template filename: product_spec[size_a](v.1).doc 5.2 mechanical requirements (continued) item description test condition requirement 16 mating characteristics mil-prf-39012, paragraph 3.7 n/a 17 connector durability mil-prf-39012, paragraph 3.15 100 cycles min 18 center contact retention mil-prf-39012, paragraph 3.12 axial force 6 lbs (captivated contact designs) 19 hermetic seal mil-prf-39012, paragraph 3.9 helium tracer gas see sales drawing 5.3 environmental requirements item description test condition requirement 20 vibration mil-prf-39012, paragraph 3.18 per mil-std-202, method 204 test condition b 21 shock mil-prf-39012, paragraph 3.19 per mil-std-202, method 213 test condition b 22 shock (thermal) mil-prf-39012, paragraph 3.2 per mil-std-202, method 107 test condition b 23 corrosion (salt spray) mil-prf-39012, paragraph 3.13 per mil-std-202, method 101 test condition b 24 moisture resistance mil-prf-39012, paragraph 3.21 per mil-std-202, method 106 dwv 1000 vrms (after drying)
|
